Chipboard screw 4.0x40 24 torx

Chipboard screw 4.0x40/24 torx Professional chipboard screw with special cutting head that prevents splitting of material. With high-end sliding coating and torx head. Packed per 200 pieces. Special features PROFTEC chipboard screws, galvanized with flat countersunk head and TX drive, are of professional quality for craftsmen who place high demands on a good screw. The design of this screw was improved in 2023 and meets the highest quality requirements of the craftsman. The coarse thread allows the screws to screw in quickly. A transparent wax layer has been applied to the screw, making them very easy to screw in and easy to process. And the extra pointed and sharp screw tip makes them grip. directly into the wood. The tip of the PROFTEC screw also has a so-called pre-drilling 'cutting point'; This means that in most cases you can work without pre-drilling, without splitting the wood. You can all screw in the 3.5 - 4.0 - 4.5 - 5.0 mm screws with the same TX-20 bit. So you do not have to change the bit while screwing with different sized screws. Sharp milling ribs under the head ensure a smooth finish when you sink the screw head into the wood. All screws from 40 mm in length are in part-thread variant. executed, with a wokkel on the shaft; for optimal functioning in wood-on-wood connections. Due to the 'free' shoulder part of the PROFTEC screw, the second wood part is attracted extra well to the first part, making the wood connection a lot stronger. The screws are packed in a handy plastic bucket, as bulk packaging. The bucket made of recycled plastic is easy to use and has a handle for lifting, which saves you a lot of cardboard waste if you use larger numbers of screws. The bucket also contains 2 bits. Technical data Diameter {mm}: 4 Length {mm}: 40 Length of thread {mm}: 24 Thread version: Partial thread Model head: Flat head Drive: TX-20Drive type: TXDrive size: 20Cutting ribs: ExternalDrill point type: Cutting point type-17Head diameter {mm}: 7.5Material: SteelSurface treatment: Electrolytically galvanizedSurface treatment color: BlueLubricant: GleitmoCE Standard: 14592Approval mark: SHRDPlug diameter: 5|6